Short answer: an EV charger layout drawing shows the charger position, the cable route from the consumer unit, isolator positions and the new circuit arrangement — so your installer quotes the real job, not a guess, and the installation is neat, safe and future-proof.
What the service involves
Our Manchester-based electrical drawings for EV charging cover: the proposed charger location (wall or pedestal), the cable route from the consumer unit — including where it runs through or around the building — isolator and protection positions, the new dedicated circuit on an updated consumer unit schedule, and earthing arrangement notes for your installer to implement. Prepared to BS 7671:2018+A4:2026.
Why plan it on paper first
- The consumer unit is rarely next to the driveway. Cable routes through garages, gardens and walls are where costs hide — a drawing exposes them before quotes, not after.
- Charger position matters. Cable length to the car's charge port, visibility from the street, and keeping the unit clear of bins and gates are all easier to decide on a plan.
- Future-proofing is cheap now, expensive later. Planning spare ways and cable routes for a second charger, or for solar PV and battery storage, costs little at drawing stage.
- Installers quote accurately. Three installers quoting from the same layout give comparable prices — and the Part P notification is straightforward when the design was thought through.
EV chargers and the regulations
An EV charger is installed on a dedicated circuit from the consumer unit, with protection appropriate to the charger and the installation. Because it is a new circuit, the work is notifiable under Part P of the Building Regulations — your installer handles this through their competent-person scheme registration or building control. Our drawings give them the design to work from; they carry out and certify the work.
For installers
Trade clients: if you fit EV chargers across Greater Manchester, we can produce customer-facing layout drawings from a site photo and a few measurements — a professional touch that helps close quotes and keeps the install team aligned.
Pricing considerations
A single-charger home layout is a compact, fixed-scope job; pricing mainly reflects the complexity of the cable route and whether you want future provisions (second charger, solar) included. How our pricing works.
EV charger questions
Do I need drawings for a home EV charger installation?
A layout drawing is not a legal requirement, but it is genuinely useful: it fixes the charger position, cable route and consumer unit arrangements before work starts, so your installer quotes accurately and there are no surprises — particularly where the consumer unit is far from the parking space.
Does an EV charger need its own circuit?
Yes. EV chargers are installed on a dedicated circuit from the consumer unit, with appropriate protection. Installing a new circuit is notifiable work under Part P, so it must be done or certified through the proper route by your installer.
What if I plan to add solar panels later?
Tell us at the start. We can plan the EV charger layout with future solar PV and battery storage in mind, so the consumer unit arrangement and cable routes do not need redoing later. See our solar PV and battery storage layouts.
Related services
- Solar PV + battery storage layouts — plan the full low-carbon setup
- Consumer unit schedules — document the new circuit properly
Plan your charger properly
Send a photo of your consumer unit and driveway for a free fixed quote.
Get a free quote